cb220
06 Feb

CB 220

Model CB 220

Important characteristics

  • Temperature range: room temperature plus 7 °C to 60 °C
  • Humidity range: up to 95% RH
  • Auto-sterilization with hot air at 180 °C
  • Double-pan humidification system with condensation protection
  • CO₂ gas-mixing jet with Venturi effect
  • Hot-air sterilizable CO₂ sensor with infrared technology
  • Humidity sensor with infrared technology
  • Display via color LCD monitor
  • Lockable door handle
  • Tightly-sealed inner door made of tempered safety glass
  • Seamless, deep-drawn inner stainless steel chamber
  • 3 perforated stainless steel shelves
  • Units are stackable with stacking adapter
  • Troubleshooting system with visual and audible alarms
  • Computer interface: Ethernet
  • Internal data recording and USB interface
  • Zero-voltage alarm contact

Model 220

Model 220 Controller CB Sterilizable CO₂-sensor Dimensions
By Product, Uncategorized Comments Off on CB 220 Read more...
cb160
06 Feb

CB 160

Model CB 160

Important characteristics

  • Temperature range: room temperature plus 7 °C to 60 °C
  • Humidity range: up to 95% RH
  • Auto-sterilization with hot air at 180 °C
  • Double-pan humidification system with condensation protection
  • CO₂ gas-mixing jet with Venturi effect
  • Hot-air sterilizable CO₂ sensor with infrared technology
  • Humidity sensor with infrared technology
  • Display via color LCD monitor
  • Lockable door handle
  • Tightly-sealed inner door made of tempered safety glass
  • Seamless, deep-drawn inner stainless steel chamber
  • 3 perforated stainless steel shelves
  • Units are stackable with stacking adapter
  • Troubleshooting system with visual and audible alarms
  • Computer interface: Ethernet
  • Internal data recording and USB interface
  • Zero-voltage alarm contact

Model 160

Model 160 Model 160 Controller CB Sterilizable CO₂-sensor Dimensions
By Product, Uncategorized Comments Off on CB 160 Read more...
cb60
06 Feb

CB 60

Model CB 60

Important characteristics

  • Temperature range: room temperature plus 7 °C to 60 °C
  • Humidity range: up to 95% RH
  • Auto-sterilization with hot air at 180 °C
  • Double-pan humidification system with condensation protection
  • CO₂ gas-mixing jet with Venturi effect
  • Hot-air sterilizable CO₂ sensor with infrared technology
  • Humidity sensor with infrared technology
  • Display via color LCD monitor
  • Lockable door handle
  • Tightly-sealed inner door made of tempered safety glass
  • Seamless, deep-drawn inner stainless steel chamber
  • 2 perforated stainless steel shelves
  • Units are stackable with stacking adapter
  • Troubleshooting system with visual and audible alarms
  • Computer interface: Ethernet
  • Internal data recording and USB interface
  • Zero-voltage alarm contact

Model 60

Model 60 Controller CB Sterilizable CO₂-sensor Dimensions  
By Product, Uncategorized Comments Off on CB 60 Read more...
15 Dec

CB Series

Series CB | CO₂ incubators with hot air sterilization and heat sterilizable CO₂ sensor

Important characteristics

  • Temperature range: room temperature plus 7 °C to 60 °C
  • Humidity range: up to 95% RH
  • Auto-sterilization with hot air at 180 °C
  • Double-pan humidification system with condensation protection
  • CO₂ gas-mixing jet with Venturi effect
  • Hot-air sterilizable CO₂ sensor with infrared technology
  • Humidity sensor with infrared technology
  • Display via color LCD monitor
  • Lockable door handle
  • Tightly-sealed inner door made of tempered safety glass
  • Seamless, deep-drawn inner stainless steel chamber
  • 2/3 perforated stainless steel shelves
  • Units are stackable with stacking adapter
  • Troubleshooting system with visual and audible alarms
  • Computer interface: Ethernet
  • Internal data recording and USB interface
  • Zero-voltage alarm contact
By Product, Uncategorized Comments Off on CB Series Read more...
22 Nov

Mini Centrifuge-Vortex

JisicoMSC-6000, Centrifuge/Vortex Multispin


1

Description

Centrifuge/vortex Multi–Spin MSC-6000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube’s bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin). We named this repetitive algorithm of operation that is aimed at reducing the mistakes during sample preparation for PCR analysis a “sms–algorithm”.

Multi–Spin is a fully automatic device for reproducing sms–algorithm for 12 tubes at one time, thus saving time considerably. A must-have instrument for PCR and DNA analyses laboratory.

Multi Spin is four devices combined in one:

  1. Centrifuge — Maximum RCF: up to 2350 × g
  2. Vortex (3 mixing modes — soft, medium, hard; regulated time; Vortexing regulation timer 1–20 sec)
  3. Centrifuge/Vortex;
  4. SMS–cycler for realization of the “sms–algorithm”.

Comparison of FVL-2400N, MSC-3000 and MSC-6000

Multi–Spin allows considerable time saving compared to Combi–Spin byautomatically performing cycling program of sample mixing and spinning according to the set spin–mix–spin cycle for 12 microtubes simultaneously.

Specification

Speed control range

1000–6000 rpm (increment 100 rpm)

RCF max.

2350 x g

Spin timer

1 sec–30 min

Vortexing intensity

Soft, medium, hard

Vortexing time

0–20 sec (increment 1 sec)

SMS-cycle regulation

1 – 999 cycles

Display

LCD, 2 x 16 signs

Safety

Lid lock

Overall dimensions

190x235x125 mm

Weight

2.5 kg

Input current/power consumption

24 V, 24 W (1 A)

External power supply

Input AC 100–240 V; 50/60 Hz; Output DC 24 V

MSC-3000, Centrifuge/Vortex Multispin

3

Description

Centrifuge/vortex Multi–Spin MSC-3000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube’s bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin). We named this repetitive algorithm of operation that is aimed at reducing the mistakes during sample preparation for PCR analysis a “sms–algorithm”.

Multi–Spin is a fully automatic device for reproducing sms–algorithm for 12 tubes at one time, thus saving time considerably. A must-have instrument for PCR and DNA analyses laboratory.

4

Multi Spin is four devices combined in one:

  1. Centrifuge — Maximum RCF: up to 800 × g
  2. Vortex (3 mixing modes — soft, medium, hard; regulated time; Vortexing regulation timer 1–20 sec)
  3. Centrifuge/Vortex;
  4. SMS–cycler for realization of the “sms–algorithm”.

Comparison of FVL-2400N, MSC-3000 and MSC-6000

Multi–Spin allows considerable time saving compared to Combi–Spin by automatically performing cycling program of sample mixing and spinning according to the set spin–mix–spin cycle for 12 microtubes simultaneously.

Specification

Speed control range

1000–3500 rpm (increment 100 rpm)

RCF max.

800 x g

Spin timer

1 sec–99 min

Vortexing intensity

Soft, medium, hard

Vortexing time

0–20 sec (increment 1 sec)

SMS-cycle regulation

1 – 999 cycles

Display

LCD, 2 x 16 signs

Safety

Autostop at open lid

Overall dimensions

190x235x125 mm

Weight

2.1 kg

Input current/power consumption

12 V, 11 W (0.9 A )

External power supply

Input AC 100–240 V; 50/60 Hz; Output DC 12 V
By Uncategorized Comments Off on Mini Centrifuge-Vortex Read more...
20 Nov

MicroONE

Tomy
The rotors can be installed with a shingle motion without tools.
This compact personal centrifuge will fit comfortably in the workspace.
User-friendly advanced design in attractive colors.
This made-in-Japan equipment promises you long lasting with highly reliable quality.

Model

1
microONE

Rotor

2
microtubes Rotor MA-1

3
Tube-strips Rotor PA-1

Speed

6,000rpm （±20%）

6,200rpm （±20%）

Force

1,290 ∼ 2,910G

Max.1,200 ∼ 2,690G
Min.810 ∼ 1,820G

Maximun Volume

1.5 (2) ml x 8tubes

0.2ml x 8tubes Connected
x 2lines

Power Required

AC120V,1A,50/60Hz   AC230V,1A,50/60Hz (CE)

Fuse

250V,0.5A

Dimensions

155W x 175D x 125Hmm

Material Lid

PC (UL94V-0)

Material Body

ABS (UL94V-0)

Material Actuator

ABS (UL94V-0)

Material Rubber

NBR

Material Rotor

ABS (UL94V-0)

Speed Control

Automatic / Constant Speed

Drive System

Direct Drive / Vibration Insulated

Brake

Dynamic Braking

Acceleration Time

Within 5 seconds up to 90% of rated speed

Deceleration Time

Within 15 seconds (Lid Close)
Within 3 seconds (Lid Open)
 * Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.
By Uncategorized Comments Off on MicroONE Read more...
20 Nov

LMC-3000

Tomy

 Genecraft

Description

LMC-3000 is a modern low-speed bench-top centrifuge designed for operation with microtest plates and centrifuge tubes up to 50 ml. This device is widely used in biomedical profile laboratories.

Features:

  • Soft start and run-down of the rotor;
  • User-friendly setting of centrifugation parameters (speed and time) and simultaneous display of both set and actual values;
  • Safe operation at any speed is provided by metal protection chamber and case cover, automatic stop at imbalance and a lock keeping the lid closed while the centrifuge is running;
  • Low noise level;
  • Wide choice of accessory rotors.

Specification

Speed regulation range for centrifuge tubes 100-3000 rpm
(1,700 × g)
Speed regulation range for microtitre plates 100-2000 rpm
(560 × g)
Setting resolution 100 rpm
Rotor imbalance diagnostics (automatic stop, “IMBALANCE” warning) +
Display LCD, 2 x 16 signs
Digital time setting 1 – 90 min (increment 1 min)
Chamber diameter 335 mm
Overall dimensions 495 x 410 x 235 mm
Weight 11.8 kg
Nominal operating voltage 230 V, 50/60 Hz or 120 V, 50/60 Hz
Power consumption (230V / 120 V) 110 W (0.5 A) / 120 W (1 A)

 

By Uncategorized Comments Off on LMC-3000 Read more...
20 Nov

Suprema Series

Tomy

suprema series

Acceleration and deceleration times are reduced by nearly 50%, compared to previous models. SUPREMA series minimize loss of operation time.

4

* Compared to the previous model with an equivalent rotor,
acceleration and deceleration times are reduced with these percentages approximately.

User Friendly Front Indicator
The Front Indicator (green/red/orange line indicator) permits monitoring the operation status from a distance.

5

The green line indicator lights up when the system is turned on.

6

The red line indicator lights up while the rotor type is being identified or the rotor is spinning.

7

The orange line indicator flashes in case errors occur in the system and relevant error messages are displayed on the LCD.

Multiple memory functions
Easy-to-use and convenient LCD

8

The LCD display on the control panel features such special functions as history and memory functions as well as memory settings for information and operation conditions on the centrifuge program.
  • A simple memory function allows setting three operation conditions for each rotor.
  • 99 memory settings can be stored.

Sample temperature display

SUPREMA Series high speed refrigerated centrifuge control and maintain the sample temperature near the set temperature using the date from chamber temperature, rotor types and rotational frequency and display the value estimated from each data as actual sample temperature.

Suprema 25

    • Data Communications Fanction (factory option) An extemal output port for data communication is provided to output the data stored in memory such as centrifuging conditions and the various historical data to PC.
    • Programmed operation function

Several operation conditions can be programmed during a centrifuging operation and automatically executed in linear sequence. This function allows to store five programs in five different combinations.

  • Centrifugal acceleration integrator function
  • Capable of consecutive spins

10-step acceleration characteristics and 10-step and natural deceleration characteristics

The initial value of acceleration and deceleration characteristics is adjusted between 0 and 500 rpm, however, the function setting allows to set the adjustable rotation speed to the maximum speed of the rotor in use, adjustable in steps of 100 rpm.

9

Design incorporates friendliness to the global environment and safety

  • HFC R404A with the ODP = 0.0, which contains no chlorine to destroy the ozone layer, is used to reduce environmental impact.
  • Imbalance detection system: The system prevents operation when the rotor is unbalanced and the maximum permissible imbalance value is exceeded, and automatically slows the rotor down and stops.
  • Safety devices:
    Lid interlock, Lid Open/Close Detector, Overspeed Detector, Overcurrent Detector (power switch), Motor Overcurrent Detector, Temperature Error Detector (high or low temperature)

High-Capacity Angle Rotor series

1,000ml Large Volume Rotor

9 NA-610
1,000ml×6
7,000rpm/11,120G
Rotor for：Suprema25
10NA-400
1,000ml×4
9,000rpm/15,220G
Rotor for：Suprema25/23 /21

 

By Uncategorized Comments Off on Suprema Series Read more...
19 Nov

Electric Muffle

J-FM28, J-FM38, J-FM48

1

● With heating elements at four sides of inner wall, heating is instantly achieved at uniform level.

● Heating elements is installed in the walls, which prevents generation of corrosive gas and contacts with water vapor, to ensure longer life.

● Microprocessor PID auto-tuning controller with digital setting and display.

● Since the air circulates between twin-fold wall structure, this air circulating system cools temperature of outer case.

● Heating cabinet is separated from control box by heat resistant panel to protect the electronic controller.

Model

J-FM28

J-FM38

J-FM48

Overall size (W×D×H)

mm

415/435×555/610×560/575

560/580×600/655×680/695

1,010×770×1,220

Chamber size (W×D×H)

mm

150×300×100

250×350×160

350×450×400

Capacity

ℓ

4.5

14

63

Temperature

range

Ambient+10℃ ~ 1,000℃(Max.)

using range

300℃ ~ 900℃

accuracy

±1% on setting temp.

controller

PID controller

regulator

SSR type

SCR type

Thermocouple

K type(CA)

Heater

kW

3

4.5

12

Heating-up time

Reaches 600℃ within 50min. (J-FM28)

Insulation

Fiber & ceramic

Heating element

Molded Kanthal A1

Safety device

Self diagnosis function (Temp. overheating,
SSR short circuit, sensor short circuit), ELB.

Material

interior

Molded ceramic block

exterior

Steel plate with powder coated finish

Power source & consumption

AC 230V 50/60Hz 1phase

AC 230V 50/60Hz 3phase

Net weight

kg

48

82

 –
By Product, Uncategorized Comments Off on Electric Muffle Read more...
19 Nov

Inspissator

J-IWL

1

● Microprocessor PID auto-tuning controller with digital setting and display.
● Over temperature protection circuit prevents overheating and protects specimen.
● Inner door with tempered glass prevents heat loss and provides convenient observation of the chamber.
● Five angle-adjustable shelves are installed.

Model

J-IWL

Overall size (W×D×H)

mm

800×720×1,310/1,750

Chamber size (W×D×H)

mm

450×500×750

Capacity

ℓ

169

Temperature

 range

95℃(Max.)

accuracy

±0.5℃ at 90.0℃

controller

 PID controller
regulator

 SSR type

Thermocouple

Pt 100 ohms

Heater(sheath)

W

2,000

Safety device

Self diagnosis function(Memory error, Temp. overheating,
SSR short circuit, Senser short circuit), ELB.
Shelves

5ea

Material

interior

Stainless steel plate

exterior

Steel plate with powder coated finish
Power source & consumption

AC 230V 50/60Hz 1phase

Net weight

kg

136
By Product, Uncategorized Comments Off on Inspissator Read more...